I received two identical tops with identically located cable holes. So it was impossible to setup correctly. Not only that but all the pilot holes in the tops underside were off by up to a quarter inch, which made it necessary to force-fudge the screws that hold the top on. The middle-top piece sits lower than the surrounding tops. One screw actually penetrated the top. It was a nightmare to assemble and very poorly constructed. If the pilot holes had been correct then it would have been fine for the money. All three top parts didnt line up to the holes so having two right sides and no left wasnt the cause (although it doesnt help this review). Its just poorly made and a huge pain to force the tops on. Id suggest buying a different desk. If I hadnt spent two hours forcing the screws in to assemble it Id take it down and send it back.
Poor production makes for inferior assembly
I received two identical tops with identically located cable holes. So it was impossible to setup correctly. Not only that but all the pilot holes in the tops underside were off by up to a quarter inch, which made it necessary to force-fudge the screws that hold the top on. The middle-top piece sits lower than the surrounding tops. One screw actually penetrated the top. It was a nightmare to assemble and very poorly constructed. If the pilot holes had been correct then it would have been fine for the money. All three top parts didnt line up to the holes so having two right sides and no left wasnt the cause (although it doesnt help this review). Its just poorly made and a huge pain to force the tops on. Id suggest buying a different desk. If I hadnt spent two hours forcing the screws in to assemble it Id take it down and send it back.