I assembled this set all by myself. I wasnt sure if Id be able to, but it wasnt hard at all. The first chair took an hour because I was figuring it out. The legs and supporting pieces were marked opposite than what they should have been. (Right was left and left was right) It became clear pretty quickly and didnt hinder my ability to assemble them successfully. The chairs hardware was real bolt/nuts and screws. My universal socket wrench and drill made for quick assembly. After I figured out the first chair, I was able to assemble the rest in 10/15 minutes each.
The table unfortunately had those Alan wrench bolts which slowed down assembly, but there was only twelve of them so it wasnt too bad. Since I was alone, I opted to assemble the table upside down, with the table top, still in its protective packaging, on top of a blanket on the floor. This worked well. The instructions tell you not to tighten all the bolts down until the table is upright and level, but I tightened them all down after all the bolts were in place. After assembly, I set the table upright and removed the packaging. It was perfectly level on the first attempt. Nice set. Pretty and sturdy. Worth the money. Total time to assemble was 3 hrs. simple yet awesome design
Good buy, easy assembly
I assembled this set all by myself. I wasnt sure if Id be able to, but it wasnt hard at all. The first chair took an hour because I was figuring it out. The legs and supporting pieces were marked opposite than what they should have been. (Right was left and left was right) It became clear pretty quickly and didnt hinder my ability to assemble them successfully. The chairs hardware was real bolt/nuts and screws. My universal socket wrench and drill made for quick assembly. After I figured out the first chair, I was able to assemble the rest in 10/15 minutes each. The table unfortunately had those Alan wrench bolts which slowed down assembly, but there was only twelve of them so it wasnt too bad. Since I was alone, I opted to assemble the table upside down, with the table top, still in its protective packaging, on top of a blanket on the floor. This worked well. The instructions tell you not to tighten all the bolts down until the table is upright and level, but I tightened them all down after all the bolts were in place. After assembly, I set the table upright and removed the packaging. It was perfectly level on the first attempt. Nice set. Pretty and sturdy. Worth the money. Total time to assemble was 3 hrs. simple yet awesome design