Welcome to deficient assembly and design problems.
Assembly instructions did not cover loose seal and cap which was laying inside box. Discovered that they go over the steering column.
Pictures used in assembly manual were very small to save paper.
The screw that was intended to hold light and front fender securely stripped out. I used a washer on the screw so front light mounting bracket will not spread and also a lock washer and nut to properly tighten screw.
Seat tube is 22.5 28.5 MM diameter. The 22.5 MM is for the uncomfortable seat leaving the 28. MM for rear fender and reflector mounting. Rear fender mounting hole is 24 MM so it will not slip over the tubes 28.5 MM. A longer screw will be required to spread the hole so it slips over the tube.
The reflector is 25 MM so a longer screw is required.
The Shimano 21 speed is not mentioned in the operations manual. The lever has been on the minus sign since day one.
Conclusion: Disappointing. Wont recommend it.
Welcome to deficient assembly and design problems.
Assembly instructions did not cover loose seal and cap which was laying inside box. Discovered that they go over the steering column. Pictures used in assembly manual were very small to save paper. The screw that was intended to hold light and front fender securely stripped out. I used a washer on the screw so front light mounting bracket will not spread and also a lock washer and nut to properly tighten screw. Seat tube is 22.5 28.5 MM diameter. The 22.5 MM is for the uncomfortable seat leaving the 28. MM for rear fender and reflector mounting. Rear fender mounting hole is 24 MM so it will not slip over the tubes 28.5 MM. A longer screw will be required to spread the hole so it slips over the tube. The reflector is 25 MM so a longer screw is required. The Shimano 21 speed is not mentioned in the operations manual. The lever has been on the minus sign since day one. Conclusion: Disappointing. Wont recommend it.