I would have given 5 stars if all the parts were assembled correctly. Assemble is not hard as long as you have one more person. You have to put some screws and stuff and nothing complicated. When we were trying to put silver stick things through holes (the things keep the chair open like a pumpkin otherwise it wont stay open) but it was sooo hard and we hurt our hands and it took awhile to do it. Then finally we were at the last step putting big black stick thing through holes so we can hook the chair to the stand, the holes were too small and couldnt put the stick through at all. We were like WTH??! Unless we put the stick, there is no way to hung the chair. That was the last thing to do and we were so excited to be done and use the chair! but that happened! So we check the same part on the bottom and tried to put the blank stick through the holes and it went through the holes with no problems at all! But we dont need to put the thing on the bottom but on the top! the top part has the loop/hook things attached to connect the chains from the stand to hung the chair, so we couldnt just flip the chair and use the bottom part as top. We thought about returning and get a new one but its such a hassle and we would not get the chair for two weeks, so we took the black parts that are holding all pumpkin chair together! The thing had 5-6 screws on each and we had to unscrew them all for top one and bottom one so we could switch the parts! Probably you cant understand what I am saying here but you would understand when you get the product! Anyway, so same parts but they were attached on wrong place, so we had to do extra things and had to unscrew after we were done with everything else. But I think we were just unlucky customers. I think as long as you get the product with right assemble as you are supposed to, you wouldnt have hard to time assemble and probably you need only 15-20mins! Other than the assemble, the chair has been awesome! I will recommend it
Assemble.....
I would have given 5 stars if all the parts were assembled correctly. Assemble is not hard as long as you have one more person. You have to put some screws and stuff and nothing complicated. When we were trying to put silver stick things through holes (the things keep the chair open like a pumpkin otherwise it wont stay open) but it was sooo hard and we hurt our hands and it took awhile to do it. Then finally we were at the last step putting big black stick thing through holes so we can hook the chair to the stand, the holes were too small and couldnt put the stick through at all. We were like WTH??! Unless we put the stick, there is no way to hung the chair. That was the last thing to do and we were so excited to be done and use the chair! but that happened! So we check the same part on the bottom and tried to put the blank stick through the holes and it went through the holes with no problems at all! But we dont need to put the thing on the bottom but on the top! the top part has the loop/hook things attached to connect the chains from the stand to hung the chair, so we couldnt just flip the chair and use the bottom part as top. We thought about returning and get a new one but its such a hassle and we would not get the chair for two weeks, so we took the black parts that are holding all pumpkin chair together! The thing had 5-6 screws on each and we had to unscrew them all for top one and bottom one so we could switch the parts! Probably you cant understand what I am saying here but you would understand when you get the product! Anyway, so same parts but they were attached on wrong place, so we had to do extra things and had to unscrew after we were done with everything else. But I think we were just unlucky customers. I think as long as you get the product with right assemble as you are supposed to, you wouldnt have hard to time assemble and probably you need only 15-20mins! Other than the assemble, the chair has been awesome! I will recommend it