I assembled this in about 4 hours by myself but I was also watching Netflixso it probably should have taken less time. The height is great and my 5 year old loves his new bed. Its a little wobbly if you give it a joltI might end up attaching some crossbars across the legs. Otherwise, great bed, Ive even slept in it with my son when he was sick and it didnt collapse!
I had a few assembly hang ups, so Ill try to help you out in case you face the same issues.
On page 8, you need to attach piece 10 (the side safety bars) to the bed using wooden dowels. This proved to be impossible if you dont loosen the headboard piece first. After I loosened all of those screws from the headboard, then I could easily attach the 10 pieces and then retighten the screws to the headboard.
Page 11, you need to roll out and attach the mattress support. You need to line the holes up PERFECTLY. My suggestion is to very loosely screw in all the screws before tightening them. Even then, it was tough so I dont know if the screw holes were a little off, or if I was. Either way, this was frustrating.
The rest of the assembly was pretty easy.
It would have been MUCH easier with two people, but I dont need no man! Also, after the fact, I see the website suggests power tools. Normally DIY furniture discourages power tools because you may over tighten or strip the screws. I would have loved to use power tools, so if you have them, definitely use them. This is awesome!
Looks good, kid loves it!
I assembled this in about 4 hours by myself but I was also watching Netflixso it probably should have taken less time. The height is great and my 5 year old loves his new bed. Its a little wobbly if you give it a joltI might end up attaching some crossbars across the legs. Otherwise, great bed, Ive even slept in it with my son when he was sick and it didnt collapse! I had a few assembly hang ups, so Ill try to help you out in case you face the same issues. On page 8, you need to attach piece 10 (the side safety bars) to the bed using wooden dowels. This proved to be impossible if you dont loosen the headboard piece first. After I loosened all of those screws from the headboard, then I could easily attach the 10 pieces and then retighten the screws to the headboard. Page 11, you need to roll out and attach the mattress support. You need to line the holes up PERFECTLY. My suggestion is to very loosely screw in all the screws before tightening them. Even then, it was tough so I dont know if the screw holes were a little off, or if I was. Either way, this was frustrating. The rest of the assembly was pretty easy. It would have been MUCH easier with two people, but I dont need no man! Also, after the fact, I see the website suggests power tools. Normally DIY furniture discourages power tools because you may over tighten or strip the screws. I would have loved to use power tools, so if you have them, definitely use them. This is awesome!