This is definitely an amazing chair, especially for the cost! I would have given this 5 stars for the product itself, but due to the assembly I felt it was appropriate to deduct one star.
Theoretically assembly is easy, as you just have to attach the back, the arms and the connector beam, aka stretcher; however the actual feat is not so easy, as it requires a technique that is not described in the instructions. So I thought I might provide some helpful tips to minimize your frustration of assembling this product.
1.Keep all bolts loose (especially the back cushion) until the entire product is assembled, then tighten each bolt.
NOTE:The back cushion is essential to keep loose in order to align the holes.
2. In order to get the connector beam( the stretcher)to align in the appropriate holes, it is important to make this the initial step and focus when attaching the arms.
NOTE: Do not attach the arms to the back cushion until the stretcher has been attached on both arms, and the other arm/seat bolts have been aligned with bolts loosely in place.
?First loosely attach the front arm/seat bolt (closest to the stretcher) to provide support. You can now maneuver the arm to align the stretcher.
?Loosely tighten the bolt for the stretcher enough to give it a good support, but not too tight so you can still adjust it.
? Loosely attach the rear arm/seat bolt to provide support in order to flip the chair to attach the second arm. Repeat the same instructions to attach the second arm.
?Once the stretcher is attached, and arm/seat bolts are in place you can align the back cushion and insert the bolts once aligned. You can now tighten all of the arm bolts simultaneously.
3. Tighten the back cushion bolts (under the seat) last, after the chair is completely assembled. You will want to tighten the middle bolt first and then tighten the left and right bolts simultaneously to give equal tension on each side. If you have a wobbly chair it is because the tension is unequally distributed. You will want to adjust the tension and test it by placing the chair upright between each adjustment, until it is corrected.
4. Do not insert the wood caps until after the chair is completely assembled to your liking; in case you need to make adjustments to the bolt tightness.
I hope this helps! This is again is such a great chair for the cost. I would hate for anyone to miss out on it due to poor assembly issues.
This is exactly what we were hoping for - chair that looks fantastic, is comfortable and is a great value! Assembly was simple! The chair is a little bit smaller than I expected, but still great.
Beautiful and easy to assemble The chair looks high quality and is good for accent seating, less for daily use. The cushions arent terrible, fairly firm. The material is soft. Assembly was simple (its just 5 pieces) but some of the holes didnt line up properly and it was difficult to screw together in some spots. Bought one to see if I liked it then bought another so Id recommend!
Great quality and design for the value The chair looks very cute in my room! It took 40 minutes to put together, which I think isnt too bad. Another review mentioned that all screws should be gradually tightened, this tip definitely helped. You cant just put one in then do the next. The leg/arm pieces were incorrectly labeled for right and left but that wasnt too bad of an issue!
The chair is also a little smaller than expected, which is totally fine for me. However, dont expect at this price point that it would be huge.
What youre paying for with this chair are two things:
- its easy to assemble (one person can do it)
- its aesthetic as an accent chair
I would certainly recommend this chair to anyone looking for a secondary seat for their living room.
Its not suited for a dinner table (sits too low and deep) and isnt supportive enough on the back to be a desk chair for regular sitting. This chair is perfect aa a temporary lounge chair, or to accent a bedroom for dressing.
At just over $140, this pushes my price point, but Im under $160 all-in and its delivered to my door.
Tough to beat if you dont mind putting in the half hour to assemble it. (Tedious, but not difficult.)
If you catch this item under $115, its worth it. I wouldnt buy another at $144, but have no regrets about this item as an accent chair. Would recommend, but would try to catch a deal.
Love the style, the price the look. Its a firm chair. My only issue is that the arms are kinda low. Im 52 my arms dont reach the arm rests and my feet just meet the ground. Overall its great for the price
Reviews
Great product for a great price
Love it so much!! It is perfect for my living room!
Amazing chair...annoying to assemble
This is definitely an amazing chair, especially for the cost! I would have given this 5 stars for the product itself, but due to the assembly I felt it was appropriate to deduct one star. Theoretically assembly is easy, as you just have to attach the back, the arms and the connector beam, aka stretcher; however the actual feat is not so easy, as it requires a technique that is not described in the instructions. So I thought I might provide some helpful tips to minimize your frustration of assembling this product. 1.Keep all bolts loose (especially the back cushion) until the entire product is assembled, then tighten each bolt. NOTE:The back cushion is essential to keep loose in order to align the holes. 2. In order to get the connector beam( the stretcher)to align in the appropriate holes, it is important to make this the initial step and focus when attaching the arms. NOTE: Do not attach the arms to the back cushion until the stretcher has been attached on both arms, and the other arm/seat bolts have been aligned with bolts loosely in place. ?First loosely attach the front arm/seat bolt (closest to the stretcher) to provide support. You can now maneuver the arm to align the stretcher. ?Loosely tighten the bolt for the stretcher enough to give it a good support, but not too tight so you can still adjust it. ? Loosely attach the rear arm/seat bolt to provide support in order to flip the chair to attach the second arm. Repeat the same instructions to attach the second arm. ?Once the stretcher is attached, and arm/seat bolts are in place you can align the back cushion and insert the bolts once aligned. You can now tighten all of the arm bolts simultaneously. 3. Tighten the back cushion bolts (under the seat) last, after the chair is completely assembled. You will want to tighten the middle bolt first and then tighten the left and right bolts simultaneously to give equal tension on each side. If you have a wobbly chair it is because the tension is unequally distributed. You will want to adjust the tension and test it by placing the chair upright between each adjustment, until it is corrected. 4. Do not insert the wood caps until after the chair is completely assembled to your liking; in case you need to make adjustments to the bolt tightness. I hope this helps! This is again is such a great chair for the cost. I would hate for anyone to miss out on it due to poor assembly issues.
Just what we wanted!
This is exactly what we were hoping for - chair that looks fantastic, is comfortable and is a great value! Assembly was simple! The chair is a little bit smaller than I expected, but still great.
Nice accent chair
Beautiful and easy to assemble The chair looks high quality and is good for accent seating, less for daily use. The cushions arent terrible, fairly firm. The material is soft. Assembly was simple (its just 5 pieces) but some of the holes didnt line up properly and it was difficult to screw together in some spots. Bought one to see if I liked it then bought another so Id recommend!
Great fit!
Great quality and design for the value The chair looks very cute in my room! It took 40 minutes to put together, which I think isnt too bad. Another review mentioned that all screws should be gradually tightened, this tip definitely helped. You cant just put one in then do the next. The leg/arm pieces were incorrectly labeled for right and left but that wasnt too bad of an issue! The chair is also a little smaller than expected, which is totally fine for me. However, dont expect at this price point that it would be huge.
Perfect Chair!
Amazing chair for the prize! Most tan leather chairs are $300+, so when I saw this I snagged it fast! It goes perfect with my boho room!
Great chair
Like others have said, dont tighten until everything assembled. Works great!
Easy to Assemble Modern Accent Chair
What youre paying for with this chair are two things: - its easy to assemble (one person can do it) - its aesthetic as an accent chair I would certainly recommend this chair to anyone looking for a secondary seat for their living room. Its not suited for a dinner table (sits too low and deep) and isnt supportive enough on the back to be a desk chair for regular sitting. This chair is perfect aa a temporary lounge chair, or to accent a bedroom for dressing. At just over $140, this pushes my price point, but Im under $160 all-in and its delivered to my door. Tough to beat if you dont mind putting in the half hour to assemble it. (Tedious, but not difficult.) If you catch this item under $115, its worth it. I wouldnt buy another at $144, but have no regrets about this item as an accent chair. Would recommend, but would try to catch a deal.
Good purchase
One chair was a little different to put together. They also arent very comfy but they are cute!
Short arm rests
Love the style, the price the look. Its a firm chair. My only issue is that the arms are kinda low. Im 52 my arms dont reach the arm rests and my feet just meet the ground. Overall its great for the price
Add a review