Before buying this bed, I read the reviews. I called to ask about older reviews. I spoke with Sunny/Sonny(?).
He assured me that the beds design had been reworked to address structural issues previously brought to their attention. For, example, they strengthened the platform around the bed to accommodate heavier customers. They also added an additional section of slats for the King and Cal King models to prevent any under-mattress shifting during heavy play : )
You will want a friend to be available to help you move the boxes into your home. They are heavy and bulky. But, it is those heavy and bulky pieces that make this bed sturdy and also have that heavy duty look and feel. You will need an electric / cordless drill with Phillips bit. Without it, you will not be able to attach the beds feet. Assembly time will be reduced by 60% in using it to drive the bolts as well.
Set aside a Saturday if assembling this alone. Half a day with assistance. Play some music, read the directions carefully and follow them exactly. Stop and take breaks. You will get through it : ) When installing the slats, remember to loosen the corner bolts to allow movement to accommodate the placement of the slats and slat framing. IMPORTANT - Do not install the slat clips into the cross or side frames until you have the slats inserted into the clips. Removing the slat clips once they are snapped in is nearly impossible. Follow the directions. Once you have the slats all clipped in, then go back and tighten the frames corner bolts while adjusting for outer frame alignment/looks/symmetry.
I ordered the white version of the Cal King. I wanted the beds feet to be white like the rest of the bed. Thus, I spent $4 on a can of white spray paint and painted the feet white the day before assembly (non-lacquer for faster drying).
As far as the color, kindly sent me phone pics of the shade of white by placing a white tissue over the bed frame. My pure white furniture is a shade lighter, but with sheets and pillows and all else in the room, you would have to be an anal idiot to notice or even care. If anyone notices or comments, disown them.
Good luck!
You will want an 8 mattress. This is the size that appears in the online photos.
Quite happy with this purchase. It actually came delivered much much faster than anticipated and very well packaged. The assembly was not that bad. Its very straight forward and the overall design is nice and is sturdy. I love how the middle rails have legs for support. You know a bed is sturdy once mattress is on and you jump into bed and hear no creaks or squeaks. The best way to assemble this is upright to get all the corners flush and secured and then lower down. So far cant complain. Ill update my review in a few months for durability. Another tip, might be helpful to replace some of the side rail (supporting the slats from the side) screws to a bit longer ones to ensure longevity. Besides that, everything was spot on and the bed is beautiful. Max 8 mattress if you want it to be flush to sides.
First and foremost, I love this bed. From design to sturdiness, this bed has it all. Unbelievably easy to assemble and s customer service has been unparalleled. I would highly recommend for anyone looking for a new and sleek bed frame.
To provide some background, my movers somehow lost one whole side of the frame. I couldve been bedless as a result but luckily for me, let me purchase the missing piece and shipped it out the next day. Ida was awesome and was very helpful. Thanks again to the team for a great product and even better customer service.
LOVE IT!
This is a great bed for the value. I weigh 280 lb and this bed has no problem supporting me. There was one little issue with the side rails of this bed, I recently just had surgery and I had to put my knee down on the side of the bed to get out of bed and it broke the top of the wood But did not put a hole through the leather. So note to self, and all others, do not stand or kneel on the sides or the end of the top of the Rails. I even added LED lights underneath because Im cheesy like that.
Awesome bed frame and excellent seller, I even broke a support slat while assembling and the shipped me two replacements immediately without asking a question! The frame is sturdy and does not make any noise or movement (Im about 2 weeks in..). Gives my room a nice modern look, my image is with a 10 memory foam mattress btw.
Ive had the bed for two months now. I really like it. It matches perfectly with my all Asian Motif Bedroom.
Its heavy and well made. Not too hard to assemble. Delivery took a long time. BUT....the company
that sells the bed, emailed me several times about my delivery. GREAT SERVICE.
I have an Asian print comforter. Looks great. I bought a 10 inch memory foam mattress for it.
It is higher than the sides of the bed. You may want to buy an 8 inch or even a 6 inch memory foam mattress
so it will be the same height as the padded sides of the bed. But I like mine above the sides.
I bought my mattress from : Modway Aveline 10 Gel Infused Memory Foam.
Im very happy with it.
UPDATE: Used for 6 months now. A PROBLEM: There are legs that support the middle of the bed. These legs have completely failed.
So, a few slats have come out and the bed sags in the middle. At first I thought it was the memory foam mattress.
Im going to fix it myself and cut some pieces of 1 x 4 and prop up the middle beam in several places.......four or five places should do it.
This is a definite mfg failure to make these legs stronger and more of them. And NO!.....I dont use my bed like a trampoline.
Also, Im single, if you get my jest. I would still buy this bed, but the MFG has to fix this problem.
Reviews
Great Bed. Great Service. Great Team.
Before buying this bed, I read the reviews. I called to ask about older reviews. I spoke with Sunny/Sonny(?). He assured me that the beds design had been reworked to address structural issues previously brought to their attention. For, example, they strengthened the platform around the bed to accommodate heavier customers. They also added an additional section of slats for the King and Cal King models to prevent any under-mattress shifting during heavy play : ) You will want a friend to be available to help you move the boxes into your home. They are heavy and bulky. But, it is those heavy and bulky pieces that make this bed sturdy and also have that heavy duty look and feel. You will need an electric / cordless drill with Phillips bit. Without it, you will not be able to attach the beds feet. Assembly time will be reduced by 60% in using it to drive the bolts as well. Set aside a Saturday if assembling this alone. Half a day with assistance. Play some music, read the directions carefully and follow them exactly. Stop and take breaks. You will get through it : ) When installing the slats, remember to loosen the corner bolts to allow movement to accommodate the placement of the slats and slat framing. IMPORTANT - Do not install the slat clips into the cross or side frames until you have the slats inserted into the clips. Removing the slat clips once they are snapped in is nearly impossible. Follow the directions. Once you have the slats all clipped in, then go back and tighten the frames corner bolts while adjusting for outer frame alignment/looks/symmetry. I ordered the white version of the Cal King. I wanted the beds feet to be white like the rest of the bed. Thus, I spent $4 on a can of white spray paint and painted the feet white the day before assembly (non-lacquer for faster drying). As far as the color, kindly sent me phone pics of the shade of white by placing a white tissue over the bed frame. My pure white furniture is a shade lighter, but with sheets and pillows and all else in the room, you would have to be an anal idiot to notice or even care. If anyone notices or comments, disown them. Good luck! You will want an 8 mattress. This is the size that appears in the online photos.
Very nice bed
Quite happy with this purchase. It actually came delivered much much faster than anticipated and very well packaged. The assembly was not that bad. Its very straight forward and the overall design is nice and is sturdy. I love how the middle rails have legs for support. You know a bed is sturdy once mattress is on and you jump into bed and hear no creaks or squeaks. The best way to assemble this is upright to get all the corners flush and secured and then lower down. So far cant complain. Ill update my review in a few months for durability. Another tip, might be helpful to replace some of the side rail (supporting the slats from the side) screws to a bit longer ones to ensure longevity. Besides that, everything was spot on and the bed is beautiful. Max 8 mattress if you want it to be flush to sides.
highly recommend
really nice and comfortable
Great product and better customer service
First and foremost, I love this bed. From design to sturdiness, this bed has it all. Unbelievably easy to assemble and s customer service has been unparalleled. I would highly recommend for anyone looking for a new and sleek bed frame. To provide some background, my movers somehow lost one whole side of the frame. I couldve been bedless as a result but luckily for me, let me purchase the missing piece and shipped it out the next day. Ida was awesome and was very helpful. Thanks again to the team for a great product and even better customer service. LOVE IT!
I like it
I like it. Little long but ok
Excellent bed for the money!
This is a great bed for the value. I weigh 280 lb and this bed has no problem supporting me. There was one little issue with the side rails of this bed, I recently just had surgery and I had to put my knee down on the side of the bed to get out of bed and it broke the top of the wood But did not put a hole through the leather. So note to self, and all others, do not stand or kneel on the sides or the end of the top of the Rails. I even added LED lights underneath because Im cheesy like that.
Modern Look!
Awesome bed frame and excellent seller, I even broke a support slat while assembling and the shipped me two replacements immediately without asking a question! The frame is sturdy and does not make any noise or movement (Im about 2 weeks in..). Gives my room a nice modern look, my image is with a 10 memory foam mattress btw.
Best bed frame!
This bed frame is great! Weve had it for three years, moved it once, and now want to match everything in its style. People always ask where we got it.
Very attractive platform bed. Very well constructed except for one thing.
Ive had the bed for two months now. I really like it. It matches perfectly with my all Asian Motif Bedroom. Its heavy and well made. Not too hard to assemble. Delivery took a long time. BUT....the company that sells the bed, emailed me several times about my delivery. GREAT SERVICE. I have an Asian print comforter. Looks great. I bought a 10 inch memory foam mattress for it. It is higher than the sides of the bed. You may want to buy an 8 inch or even a 6 inch memory foam mattress so it will be the same height as the padded sides of the bed. But I like mine above the sides. I bought my mattress from : Modway Aveline 10 Gel Infused Memory Foam. Im very happy with it. UPDATE: Used for 6 months now. A PROBLEM: There are legs that support the middle of the bed. These legs have completely failed. So, a few slats have come out and the bed sags in the middle. At first I thought it was the memory foam mattress. Im going to fix it myself and cut some pieces of 1 x 4 and prop up the middle beam in several places.......four or five places should do it. This is a definite mfg failure to make these legs stronger and more of them. And NO!.....I dont use my bed like a trampoline. Also, Im single, if you get my jest. I would still buy this bed, but the MFG has to fix this problem.
Just as advertised
Comfortable, looks elegant and relatively easy to put together.
Add a review