This is such an awesome bed for the price, my kids and I love it! They spend countless hours playing house on it. My only negative review would be the set up. The instructions are right and straight forward but the bed came completely disassembled and some of the assembly was tricky even with me helping him.
Im going to include some assembly tips below because there were a couple of steps that were very tricky. Definitely a brain teaser puzzle! Other reviewers were a helpful heads up. Overall a solid, modern bunk bed with good weight limits. Its hard to find low profile bunks that arent for little kids. This totally fits the bill. We needed it for a cabin bunk room with lower ceilings. The ladder placement is very solid. The mattress slats/bars make a lot of noise during assembly but once mattresses were in place it was fine.
This took two capable adults 2.5 hours to assemble. Now that I understand a couple of things it would probably shave off 45 min! You cannot do this alone. Its not humanly possible. Tips for two tricky steps:
1. Assembly for the mattress slats is poorly planned. Only two bars per mattress frame screw into place. The rest are a game of pick up sticks. The twin (top) is harder than the bottom (full). We ended up placing a board underneath so the cross bars could be elevated and we could put the sides into position. Screw in both stationary cross bars first on one side only. Place that side against a wall. Put the board down and then place your cross bars. You have to very carefully align the other railing or everything will fall out. For the bottom, you dont need a board underneath. Same start but for the other railing lay it on its side and set the bars on top of the holes. Slowly in tandem rotate the rail into position. This step takes a lot of patience.
2. For the big assembly step, which has one illustration, assemble on its back side. Place the side rails on the back (long flat edge on the floor, curved edge facing the ceiling). When putting the bottom mattress frame into place, be sure that the screw holes for the ladder are lined up in the right place. Screw parts into place but dont over tighten them. Once assembled, carefully flip upright. Since its a low bunk bed youll have ceiling clearance. Once upright, realign and tighten screws.
Also the plastic caps for the tube ends are loose and dont stay in place so will be glueing them.
It was fairly simple to put together. A few times the instructions got confusing/ like on the roof.
But its very sturdy. Im a bigger lady and Ive gotten onto the top bunk before.
Would recommend !
I am 16 and my best friend is 14. She stays at my house a lot so we got bunk beds last year. The other night one of the bars bent and popper out of the holes for the top bunk, other than that it has held my weight and as someone who is plus sized, its hard to find beds that feel sturdy and other. There is a slight wiggle when I climb onto the top bunk but it is much better that the bunk bed I bought in the past.
Reviews
Nada
No me agrado que no me llegaron las piezas completas
Overall we are happy!
We love the bed! The only issue we have is the screws need to be tightened every once in a while because they slowly loosen.
So cute!
This such a cute bed! Only took my husband about 2/3 hours to put together and it is very sturdy. Definitely worth the money!
My kids love it.
This is such an awesome bed for the price, my kids and I love it! They spend countless hours playing house on it. My only negative review would be the set up. The instructions are right and straight forward but the bed came completely disassembled and some of the assembly was tricky even with me helping him.
My grandson LOVES this bed!!
Got this for my grandson(4 yrs old) and he loves it!!
Good value for price
Im going to include some assembly tips below because there were a couple of steps that were very tricky. Definitely a brain teaser puzzle! Other reviewers were a helpful heads up. Overall a solid, modern bunk bed with good weight limits. Its hard to find low profile bunks that arent for little kids. This totally fits the bill. We needed it for a cabin bunk room with lower ceilings. The ladder placement is very solid. The mattress slats/bars make a lot of noise during assembly but once mattresses were in place it was fine. This took two capable adults 2.5 hours to assemble. Now that I understand a couple of things it would probably shave off 45 min! You cannot do this alone. Its not humanly possible. Tips for two tricky steps: 1. Assembly for the mattress slats is poorly planned. Only two bars per mattress frame screw into place. The rest are a game of pick up sticks. The twin (top) is harder than the bottom (full). We ended up placing a board underneath so the cross bars could be elevated and we could put the sides into position. Screw in both stationary cross bars first on one side only. Place that side against a wall. Put the board down and then place your cross bars. You have to very carefully align the other railing or everything will fall out. For the bottom, you dont need a board underneath. Same start but for the other railing lay it on its side and set the bars on top of the holes. Slowly in tandem rotate the rail into position. This step takes a lot of patience. 2. For the big assembly step, which has one illustration, assemble on its back side. Place the side rails on the back (long flat edge on the floor, curved edge facing the ceiling). When putting the bottom mattress frame into place, be sure that the screw holes for the ladder are lined up in the right place. Screw parts into place but dont over tighten them. Once assembled, carefully flip upright. Since its a low bunk bed youll have ceiling clearance. Once upright, realign and tighten screws. Also the plastic caps for the tube ends are loose and dont stay in place so will be glueing them.
Sturdy and cute
It was fairly simple to put together. A few times the instructions got confusing/ like on the roof. But its very sturdy. Im a bigger lady and Ive gotten onto the top bunk before. Would recommend !
My girls love it!
It was easy to put together once I got going some of the part wasnt label but my girls love it .It took me about 4 hours to complete
A little weak but still love it.
I am 16 and my best friend is 14. She stays at my house a lot so we got bunk beds last year. The other night one of the bars bent and popper out of the holes for the top bunk, other than that it has held my weight and as someone who is plus sized, its hard to find beds that feel sturdy and other. There is a slight wiggle when I climb onto the top bunk but it is much better that the bunk bed I bought in the past.
Kids love it!
Easy to put together for someone whos mechanically inclined. May be difficult or take longer for someone who isnt. Overall, its a great bunk bed.
Add a review