We’re using it for occasional grandchildren visits. We just had two teen girls and them having separate beds worked well. We did get pretty good mattresses, combinations of spring and foam, recommended by . They worked well and when I sit on the top one it feels comfortable. I have not lain down on it. Because this one has no back, it could be perpendicular to the wall like a twin bed rather than parallel. Picture shows lower mattress partially pulled out.
Well worth the money, the only problem is the trundle mattress has to be not a pillow top or it won’t fit under the bed. We also decided to mattress and box spring on top so it would be higher
Went together smoothly. The only thing I found odd. The more decorative wood side was facing inwardly of the bed. Both ends. Whereas the rougher finish side was outward.
Should of been the other way around.
What I like is the sturdiness what I don’t like is that it sits too low for the botttm bed to be made. Also, both ends have that bar going across. It could be much lower and allow for more room for taller people.
When I was considering buying this bed for a guest room, I spent a LOT of time on finding a thick enough mattress to put on the trundle so an adult would be comfortable. There’s about 8 inches of clearance between the trundle and bed, limiting your options to mattresses that are about 7 inches thick and usually made for kids (who are lightweight!).
I wanted to be able to sleep an adult guest on the trundle. However, reviews for 7-inch mattresses on indicate that adults aren’t comfortable sleeping on them. So I needed to lift the bed up a bit to create space. (Also note you shouldn’t stuff a mattress in underneath because you need a bit of space for airflow between the two mattresses; otherwise you risk growing mold.)
Also good to know: the bed doesn’t have “feet” that make it easy to lift with any kind of riser. And if you want to add more support for the mattress (because the slats are spaced widely — more than 3 inches apart), you will need to factor that in. I did not add support for my mattresses.
Here’s what I did:
1. Purchased an 8-inch mattress (Nod by Tuft & Needle, 8-inch Twin, ) for the trundle. Without lifting the bed, the mattress was stuffed tightly underneath.
2. Placed multiple rubber furniture risers under the four corners of the bed to lift it 1-2 inches (2 half-inch thick brown ones, plus 1 hard "slider"). See photos of the risers and the clearance it gives the mattress (note no sheet on the mattress in the clearance photo —?the gray cover comes with the Nod). Carpet makes it harder for the risers to work.
The rest of the items I bought are:
??Casper 12-inch Twin mattress (“The Casper Mattress”) for the upper mattress
??Kingole Flannel Fleece Luxury Throw Blanket
??INGALIK Premium Bed Sheet Set 3 Piece 120 GSM Brushed Microfiber, 1800 Series Hotel Luxury Bedding Sheets
??Multiple kinds of pillows to give my guests options for firmness
There’s another review with photos where someone added metal supports to lift the bed 4-6 inches so they could fit some thick mattresses they already have. I think this is a great idea! However, I didn’t have the tools or energy to do this.
Overall I think this bed is fine and both mattresses feel pretty good. I wouldn’t have a heavy person sleep on the trundle. If I were doing it over again, I might spend more time looking for a daybed with more height, but I ran out of time.
When the bed arrived, I was overwhelmed by the number of components. Instructions said easy as 1-2-3.. well there are a lot more than 3 pieces! BUT the instructions were awesome, and the engineering on the product is top rate. It really was easy to assemble, and everything fit/connected as it should. Was so impressed with this company, that we ordered their mattresses as well.
Whenever I need to buy a bed frame, I always end up getting a frame. They look great and they’re so easy to put together. Their instructions are bang on every time too.
Side note!!!! Don’t remove the film on the anti slip slats. They’re so sticky and will rip the bottom of your mattress whenever you go to rotate it. It’s terrible and makes no sense to me why they’re even a thing.
Reviews
It has what seems like a thousand parts, but in they are marked and there is a video to follow.
We’re using it for occasional grandchildren visits. We just had two teen girls and them having separate beds worked well. We did get pretty good mattresses, combinations of spring and foam, recommended by . They worked well and when I sit on the top one it feels comfortable. I have not lain down on it. Because this one has no back, it could be perpendicular to the wall like a twin bed rather than parallel. Picture shows lower mattress partially pulled out.
Love it
Well worth the money, the only problem is the trundle mattress has to be not a pillow top or it won’t fit under the bed. We also decided to mattress and box spring on top so it would be higher
It is a good little bed for young kids.
Went together smoothly. The only thing I found odd. The more decorative wood side was facing inwardly of the bed. Both ends. Whereas the rougher finish side was outward. Should of been the other way around.
I'm impressed!
What a great bed! It was easy to assemble and is a great quality for the money.
Awesome piece of furniture !
What a wonderful bed ! Amazing fit and finish. Easy to assemble and an INCREDIBLE value. I am so pleased with it.
It’s built fairly well. Sits too low.
What I like is the sturdiness what I don’t like is that it sits too low for the botttm bed to be made. Also, both ends have that bar going across. It could be much lower and allow for more room for taller people.
Add height if you want the trundle to have a mattress 8 inches or thicker
When I was considering buying this bed for a guest room, I spent a LOT of time on finding a thick enough mattress to put on the trundle so an adult would be comfortable. There’s about 8 inches of clearance between the trundle and bed, limiting your options to mattresses that are about 7 inches thick and usually made for kids (who are lightweight!). I wanted to be able to sleep an adult guest on the trundle. However, reviews for 7-inch mattresses on indicate that adults aren’t comfortable sleeping on them. So I needed to lift the bed up a bit to create space. (Also note you shouldn’t stuff a mattress in underneath because you need a bit of space for airflow between the two mattresses; otherwise you risk growing mold.) Also good to know: the bed doesn’t have “feet” that make it easy to lift with any kind of riser. And if you want to add more support for the mattress (because the slats are spaced widely — more than 3 inches apart), you will need to factor that in. I did not add support for my mattresses. Here’s what I did: 1. Purchased an 8-inch mattress (Nod by Tuft & Needle, 8-inch Twin, ) for the trundle. Without lifting the bed, the mattress was stuffed tightly underneath. 2. Placed multiple rubber furniture risers under the four corners of the bed to lift it 1-2 inches (2 half-inch thick brown ones, plus 1 hard "slider"). See photos of the risers and the clearance it gives the mattress (note no sheet on the mattress in the clearance photo —?the gray cover comes with the Nod). Carpet makes it harder for the risers to work. The rest of the items I bought are: ??Casper 12-inch Twin mattress (“The Casper Mattress”) for the upper mattress ??Kingole Flannel Fleece Luxury Throw Blanket ??INGALIK Premium Bed Sheet Set 3 Piece 120 GSM Brushed Microfiber, 1800 Series Hotel Luxury Bedding Sheets ??Multiple kinds of pillows to give my guests options for firmness There’s another review with photos where someone added metal supports to lift the bed 4-6 inches so they could fit some thick mattresses they already have. I think this is a great idea! However, I didn’t have the tools or energy to do this. Overall I think this bed is fine and both mattresses feel pretty good. I wouldn’t have a heavy person sleep on the trundle. If I were doing it over again, I might spend more time looking for a daybed with more height, but I ran out of time.
Easier to assemble than its looks, and nice bed!
When the bed arrived, I was overwhelmed by the number of components. Instructions said easy as 1-2-3.. well there are a lot more than 3 pieces! BUT the instructions were awesome, and the engineering on the product is top rate. It really was easy to assemble, and everything fit/connected as it should. Was so impressed with this company, that we ordered their mattresses as well.
It looks great and was so easy to put together.
Whenever I need to buy a bed frame, I always end up getting a frame. They look great and they’re so easy to put together. Their instructions are bang on every time too. Side note!!!! Don’t remove the film on the anti slip slats. They’re so sticky and will rip the bottom of your mattress whenever you go to rotate it. It’s terrible and makes no sense to me why they’re even a thing.
Cheap replacement for Minimal Use
Wish that it had a weight limit mentioned. During the week I sleep on it and I’m 350lbs + and it feels like it is bending.
Add a review