Pros:
1. The chair is very comfortable to sit in.
2. The wheels are very smooth.
3. The faux leather is very easy to clean.
4. Height adjustment is very simple.
5. You can choose how much you want this to lean back, if at all.
Cons:
1. The arm rests are quite narrow and thinly padded.
2. When dirty, it's very noticeable on the faux leather.
3. The chair has just a hair of wobble to it. This is because the height adjustment simply sits inside a hole underneath the base of the chair. This is a very common way chairs like this are done, but I wish it wasn't the case.
Overall, this is quite a nice chair, even with the minor issues.
Recommended
4 stars
Cheers!
Good not great. The faux leather seems pretty nice if not a bit thin. Curious to see how it holds up to daily use in the home office. Its a much more compact size than the previous chair. It also doesnt have anywhere near the adjustability of the old one. I think Im this case, keeping it simple is a good thing. Assembly was very simple. Literally 10 minutes. It looks pretty good in the office. Gives off the feeling of being a more expensive chair.
This is a very comfortable chair for sitting at a desk for many hours even. It feels as high quality as another very expensive office chair that I have in my office. It's well padded, and the material feels quite sturdy and good quality. It easily supports a larger man (250). Best part though is that it was easy to put together, and I'm not the least bit mechanically inclined. I'm very happy with this desk chair.
The back support is perfect just as the area of supporting your hands is very comfortable. I dare to say that it is ideal for people who have back pain to be sitting in front of their doctor like me for a long time. It feels soft, the material from which it is made and does not produce heat even if you are sitting for a long time. You can adjust the height is perfect for the office, classroom and for your home
All of the parts to assemble this chair were triple-boxed and arrived in excellent condition. Using the included Allen wrench, I assembled this chair in less than an hour using the clear instructions and the carefully labeled blister packed bolts. Using an impact tool to tighten the bolts could have made the assembly go faster. I needed a hammer to gently tap the castors into their sockets on the base.
The base of this chair with roller castors has five arms that extend beyond the width and depth of the seat helping to ensure that leaning back or to the side won't cause the chair to tip over.
A lever extends to the right side of the chair to allow easy height adjustment. The tilt tension adjustment below the bottom of the seat either locks the seat in an upright position or can be adjusted to allow a degree of backward tilt.
I found good fit and finish with all of the parts. Both my wife and I found the seat and back to be quite comfortable with good lower back support. The arm rests are secure and sturdy enough to allow me to use them to help lift myself from the seat. The arm rests extend only half-way from the back of the chair allowing the front half of the chair to roll under a desk without banging them on the desk.
Overall, I found this to be an attractive, comfortable, serviceable computer/office desk chair.
This Basic Padded Mid-Back Office Chair lives up to expectations as advertised in the item description. While not an exceptionally plush chair, it was not stated to be so. The chair is comfortable and functional with satisfactory padding for extended periods of sitting. Also key to being comfortable over extended periods is the molding of the seat and back by sections of heavy stitching used to shape and form a suitable configuration. As the stitching is heavy and secure, it appears to be very durable. Rollers slide smoothly across hard surfaces and appropriately easily on low-pile carpet, and the pneumatic adjustment works well to position both the chair and the occupant. Padding on the armrests is basic, as the name implies, yet again, adequate for comfort. Even assembly was pretty straightforward. As a sidenote, it was packaged so well that removing the parts of the chair from a box inside a box inside a box took some effort. Just be aware.
Although I would say this chair is pretty nice, the first thing I will say about any PU leather chair is that they do not last all the long. The leather tends to crack and rip after maybe a year of use so be aware of that. Other than that this chair is actually pretty nice. If you are one who do not like having the arm rest on this, I would not recommend getting this as the arm rest are actually needed to hold this chair together. The arm rest do have padding on them so your elbows will not get hurt or sore being placed on this. The wheel movement across the floor is not exactly smooth or quiet (on wooden floor) but it can be moved around if needed. You can make adjustments to the chair to move up or down. It does lean back but there is no way to really adjust the chair to make it so that it leans forward towards your back. The chair is pretty comfortable and conforms to your butt pretty well. The chair is not too heavy and is something that can be carried up the stairs if needed (although use your own discretion when doing this). There are some downsides to a PU leather chair and that it does not have very good airflow so during the summer your sweat can really stick to this chair and wear down the leather faster. The padding under the leather also will most likely wear out pretty quick and eventually there will not be much cushion when sitting on this. The head rest is nice when you are leaning back though and provides pretty good neck and shoulder support. Assembling this chair was fairly easy as all you really need to the chair, legs, and arm rest. All of the tools are provided so you do not require any additional tools. You do need to apply some force when putting the arm rest onto the chair as it will actually pull the back of the chair in and it is like cranking a chain. Overall I do think this chair is pretty nice. It is comfortable, easy to assemble, the black color looks nice. The only issue I see is like with any PU chair, it will most likely crack and chip in the future and the padding on the chairs tend to lose it's cushion pretty fast.
Since my son is getting older, I've started tasking him with things he'll need to be doing as an adult. Such as building computer chairs! This was the perfect opportunity for him to work on his skills. He was able to put it up without any real need for help. Only asked his older brother for help once, and it was just to hold the chair-back up while he screwed a piece in. I'm not a huge fan of the brown, but it's not the worst thing in the world. It's certainly better than his last chair, which was literally falling apart. It's also super comfortable as well.
This chair is wonderful! It is softer than it looks and easily adjustable. Best of all assembly was a breeze. It might be a little heavy for some, so use care when assembling. There were just about 17 screws that needed to go in and they all can be installed with the handy Allen wrench that they include. The screws are all in little separate compartments in the pack and labeled making assembly even easier. The instructions, like all products, are perfectly written making everything a breeze!
Great quality, easy assembly, very stable, looks fantastic, we love it!
5 stars!
First thing I will say after putting so many of this style of chair together do the wheels last.
It is just so much easier to get the chair screwed onto the lift without it rolling around.
Now the directions with this one are a tad odd.
They are way in the back of the book and right before it tells you not to tighten the ones for steps 9 and 10 and then to tighten the ones for 9 and 11.
Why not just say that on the page once you get to that point? Instead they have it in the beginning and honestly I didn't really pay much attention to that part anyway.
Easy to build this one alone. Only takes about 15 min.
One other thing once you zip the back up again after taking out the parts you can actually do it in a way to slide the pull into the fabric and not have it hanging out anymore.
This is a comfortable chair and glide up and do effortlessly.
I am average height so it fits me fine but others it might be too short as it is only a mid height in the back.
Overall am quite pleased with the quality of this one.
Reviews
Very comfortable, standard height desk chair.
Pros: 1. The chair is very comfortable to sit in. 2. The wheels are very smooth. 3. The faux leather is very easy to clean. 4. Height adjustment is very simple. 5. You can choose how much you want this to lean back, if at all. Cons: 1. The arm rests are quite narrow and thinly padded. 2. When dirty, it's very noticeable on the faux leather. 3. The chair has just a hair of wobble to it. This is because the height adjustment simply sits inside a hole underneath the base of the chair. This is a very common way chairs like this are done, but I wish it wasn't the case. Overall, this is quite a nice chair, even with the minor issues. Recommended 4 stars Cheers!
Good office chair
Good not great. The faux leather seems pretty nice if not a bit thin. Curious to see how it holds up to daily use in the home office. Its a much more compact size than the previous chair. It also doesnt have anywhere near the adjustability of the old one. I think Im this case, keeping it simple is a good thing. Assembly was very simple. Literally 10 minutes. It looks pretty good in the office. Gives off the feeling of being a more expensive chair.
Very comfortable, sturdy chair
This is a very comfortable chair for sitting at a desk for many hours even. It feels as high quality as another very expensive office chair that I have in my office. It's well padded, and the material feels quite sturdy and good quality. It easily supports a larger man (250). Best part though is that it was easy to put together, and I'm not the least bit mechanically inclined. I'm very happy with this desk chair.
Very comfortable and with good design
The back support is perfect just as the area of supporting your hands is very comfortable. I dare to say that it is ideal for people who have back pain to be sitting in front of their doctor like me for a long time. It feels soft, the material from which it is made and does not produce heat even if you are sitting for a long time. You can adjust the height is perfect for the office, classroom and for your home
Stable and Comfortable
All of the parts to assemble this chair were triple-boxed and arrived in excellent condition. Using the included Allen wrench, I assembled this chair in less than an hour using the clear instructions and the carefully labeled blister packed bolts. Using an impact tool to tighten the bolts could have made the assembly go faster. I needed a hammer to gently tap the castors into their sockets on the base. The base of this chair with roller castors has five arms that extend beyond the width and depth of the seat helping to ensure that leaning back or to the side won't cause the chair to tip over. A lever extends to the right side of the chair to allow easy height adjustment. The tilt tension adjustment below the bottom of the seat either locks the seat in an upright position or can be adjusted to allow a degree of backward tilt. I found good fit and finish with all of the parts. Both my wife and I found the seat and back to be quite comfortable with good lower back support. The arm rests are secure and sturdy enough to allow me to use them to help lift myself from the seat. The arm rests extend only half-way from the back of the chair allowing the front half of the chair to roll under a desk without banging them on the desk. Overall, I found this to be an attractive, comfortable, serviceable computer/office desk chair.
Very comfortable. Not overly difficult to assemble.
This Basic Padded Mid-Back Office Chair lives up to expectations as advertised in the item description. While not an exceptionally plush chair, it was not stated to be so. The chair is comfortable and functional with satisfactory padding for extended periods of sitting. Also key to being comfortable over extended periods is the molding of the seat and back by sections of heavy stitching used to shape and form a suitable configuration. As the stitching is heavy and secure, it appears to be very durable. Rollers slide smoothly across hard surfaces and appropriately easily on low-pile carpet, and the pneumatic adjustment works well to position both the chair and the occupant. Padding on the armrests is basic, as the name implies, yet again, adequate for comfort. Even assembly was pretty straightforward. As a sidenote, it was packaged so well that removing the parts of the chair from a box inside a box inside a box took some effort. Just be aware.
Amazing and comfortable desk chair
Although I would say this chair is pretty nice, the first thing I will say about any PU leather chair is that they do not last all the long. The leather tends to crack and rip after maybe a year of use so be aware of that. Other than that this chair is actually pretty nice. If you are one who do not like having the arm rest on this, I would not recommend getting this as the arm rest are actually needed to hold this chair together. The arm rest do have padding on them so your elbows will not get hurt or sore being placed on this. The wheel movement across the floor is not exactly smooth or quiet (on wooden floor) but it can be moved around if needed. You can make adjustments to the chair to move up or down. It does lean back but there is no way to really adjust the chair to make it so that it leans forward towards your back. The chair is pretty comfortable and conforms to your butt pretty well. The chair is not too heavy and is something that can be carried up the stairs if needed (although use your own discretion when doing this). There are some downsides to a PU leather chair and that it does not have very good airflow so during the summer your sweat can really stick to this chair and wear down the leather faster. The padding under the leather also will most likely wear out pretty quick and eventually there will not be much cushion when sitting on this. The head rest is nice when you are leaning back though and provides pretty good neck and shoulder support. Assembling this chair was fairly easy as all you really need to the chair, legs, and arm rest. All of the tools are provided so you do not require any additional tools. You do need to apply some force when putting the arm rest onto the chair as it will actually pull the back of the chair in and it is like cranking a chain. Overall I do think this chair is pretty nice. It is comfortable, easy to assemble, the black color looks nice. The only issue I see is like with any PU chair, it will most likely crack and chip in the future and the padding on the chairs tend to lose it's cushion pretty fast.
13 Year Old Put Together
Since my son is getting older, I've started tasking him with things he'll need to be doing as an adult. Such as building computer chairs! This was the perfect opportunity for him to work on his skills. He was able to put it up without any real need for help. Only asked his older brother for help once, and it was just to hold the chair-back up while he screwed a piece in. I'm not a huge fan of the brown, but it's not the worst thing in the world. It's certainly better than his last chair, which was literally falling apart. It's also super comfortable as well.
Comfortable, easy to assemble, looks fantastic!
This chair is wonderful! It is softer than it looks and easily adjustable. Best of all assembly was a breeze. It might be a little heavy for some, so use care when assembling. There were just about 17 screws that needed to go in and they all can be installed with the handy Allen wrench that they include. The screws are all in little separate compartments in the pack and labeled making assembly even easier. The instructions, like all products, are perfectly written making everything a breeze! Great quality, easy assembly, very stable, looks fantastic, we love it! 5 stars!
Comfortable quality chair
First thing I will say after putting so many of this style of chair together do the wheels last. It is just so much easier to get the chair screwed onto the lift without it rolling around. Now the directions with this one are a tad odd. They are way in the back of the book and right before it tells you not to tighten the ones for steps 9 and 10 and then to tighten the ones for 9 and 11. Why not just say that on the page once you get to that point? Instead they have it in the beginning and honestly I didn't really pay much attention to that part anyway. Easy to build this one alone. Only takes about 15 min. One other thing once you zip the back up again after taking out the parts you can actually do it in a way to slide the pull into the fabric and not have it hanging out anymore. This is a comfortable chair and glide up and do effortlessly. I am average height so it fits me fine but others it might be too short as it is only a mid height in the back. Overall am quite pleased with the quality of this one.
Add a review